Reverse osmosis (RO) is ultra clean filtered water that help saltwater aquariums thrives. RODI goes one step further filtering 99.99% ( Di = Di Ionization)
This is the water we use here at Fragbox and recommended for all reefers.
We recommend changing your media as soon as you hit 1ppm. Use a tds meter to get an accurate reading.
Replace broken, leaking canisters or simply add more filtration power to your existing RODI unit. All come with 1/4” Push connect john guest fitting that work with 1/4” rigid water line.
The pressure gauge lets you know if you are in the optimal 60-100psi for proper pressure. TDS meters give you a reading in ppm to let you know when its time to change your media. At Fragbox we change ours at 1ppm.
The easy sink RODI connector is the single best and easiest way to connect any RODI unit to a sink or even a toilet. Use the float valve to convert anything into a RODI reservoir and turn off when full
You don’t want to flood your home by forgetting to turn your RODI off. Personally we always set timers but what if you dont hear it ? what if a float valve fails (which they sometimes do). Prevent water catastrophe with these redundancy automation tools.
RODI Units need a pressure of 60-100psi to work properly and efficiently. If you are running lower than this it may not be working properly or exhausting media too fast, consider a compact booster pump .
